Safron fo200 Power amplifier for bass guitar

Photograph shows the prototype fo200 Bass Power Amp, which was designed to drive the fo410 bass cab. When Tom used the same amplifier with the fo Jazz 15, he found that the 15" enclosure sounded even better than before. This was no doubt due to the extra headroom provided by a power supply that has enough spare capacity for when the amp block is asked to deliver 400 watts into 4 ohms.

Specifications

Dimensions		3U 19" rack unit, 420 mm deep
Input sensitivity		500mV unbalanced
Input impedance		10k ohms
Maximum Power Output	200 watts RMS into 8 ohms
Maximum Power Output	400 watts RMS into 4 ohms
Frequency response		5Hz to 50kHz
Output Noise		-95dBu

Designed around a high power amplifier block by Prism Audio Ltd, and special TW power supply
RFI filtering on inputs, and AC power; Very low distortion and noise
Input and output connector bonding to AES48 specifications; Meets the European EMC specifications: EN55103-1 & EN55103-2

595 GBP (874 Euros)

A deposit of 10% is required with your order; delivery is extra, but at cost...

email Tony: twaudio@hotmail.com Landline: +44(0)1582 431549; cell 'phone: +44 (0)7947 788607; postal address: 24 Knoll Rise, Luton, LU2 7JA, UK.